HSK-E-SR
SR Slim Shrink Tool Holder-HSK-E
Deflection runout≦0.003mm (4 times length)
Slender design, can overcome interference processing, rough and fine processing can be corresponded
After a special heat treatment process, the best accuracy and life can be maintained
The tool is clamped 360° all around, the rigidity can be greatly improved
Full range of dynamic balance
The shrink machine is available in high-end/economical styles
動平衡 Balancing
Max.30,000 RPM Or U<= 1gmm
Max.30,000 RPM Or U<= 1gmm
Dimensions
Comparison of size indication and detailed specifications
| Order No. Order number | ∅d | ∅d1 | ∅d2 | L | L1 | L2 | L3 | Tool Clamping Depth L4 Tool clamping depth | Screw Adjustment screw |
|---|---|---|---|---|---|---|---|---|---|
| HSK25E SR04-035 | 4 | 10 | 12.5 | 35 | 25 | min18 | |||
| HSK25E SR06-035 | 6 | 12 | 14.5 | 35 | 25 | min24 |
| Order No. Order number | ∅d | ∅d1 | ∅d2 | L | L1 | L2 | L3 | Tool Clamping Depth L4 Tool clamping depth | Screw Adjustment screw |
|---|---|---|---|---|---|---|---|---|---|
| HSK32E SR04-60 | 4 | 10 | 14.1 | 60 | 40 | min18 | |||
| HSK32E SR04-90 | 4 | 10 | 16.7 | 90 | 70 | 30 | min18 | ||
| HSK32E SR06-060 | 6 | 12 | 16.1 | 60 | 40 | min24 | |||
| HSK32E SR06-090 | 6 | 12 | 18.7 | 90 | 70 | 40 | 21.5~31.5 | HY06-M5 | |
| HSK32E SR08-060 | 8 | 14 | 18.1 | 60 | 40 | min30 | |||
| HSK32E SR08-090 | 8 | 14 | 20.7 | 90 | 70 | 40 | 25.5~35.5 | HY08-M6 | |
| HSK32E SR10-060 | 10 | 16 | 20.1 | 60 | 40 | min35 | |||
| HSK32E SR10-090 | 10 | 16 | 22.7 | 90 | 70 | 50 | 31.5~41.5 | HY08-M6 |
| Order No. Order number | ∅d | ∅d1 | ∅d2 | L | L1 | L2 | L3 | Tool Clamping Depth L4 Tool clamping depth | Screw Adjustment screw |
|---|---|---|---|---|---|---|---|---|---|
| HSK40E SR04-090 | 4 | 10 | 16.5 | 90 | 70 | 67.2 | 30 | min18 | |
| HSK40E SR04-120 | 4 | 10 | 19.5 | 120 | 100 | 97.2 | 30 | min18 | |
| HSK40E SR06-090 | 6 | 12 | 18.5 | 90 | 70 | 67.2 | 40 | 21.5~31.5 | HY06-M5 |
| HSK40E SR06-120 | 6 | 12 | 21.6 | 120 | 100 | 97.2 | 40 | 21.5~31.5 | HY06-M5 |
| HSK40E SR08-090 | 8 | 14 | 20.6 | 90 | 70 | 67.2 | 40 | 25.5~35.5 | HY06-M5 |
| HSK40E SR08-120 | 8 | 14 | 23.6 | 120 | 100 | 97.2 | 40 | 25.5~35.5 | HY08-M5 |
| HSK40E SR10-090 | 10 | 16 | 22.8 | 90 | 70 | 50 | 31.5~41.5 | HY08-M6 | |
| HSK40E SR10-120 | 10 | 16 | 25.6 | 120 | 100 | 97.2 | 50 | 31.5~41.5 | HY08-M6 |
| Order No. Order number | ∅d | ∅d1 | ∅d2 | L | L1 | L2 | L3 | Tool Clamping Depth L4 Tool clamping depth | Screw Adjustment screw |
|---|---|---|---|---|---|---|---|---|---|
| HSK50E SR04-125 | 4 | 10 | 19.4 | 125 | 99 | 96.2 | 30 | min18 | |
| HSK50E SR06-125 | 6 | 12 | 21.5 | 125 | 99 | 96.2 | 40 | 21.5~31.5 | HY06-M5 |
| HSK50E SR08-125 | 8 | 14 | 23.5 | 125 | 99 | 96.2 | 40 | 25.5~35.5 | HY08-M6 |
| HSK50E SR10-125 | 10 | 16 | 25.5 | 125 | 99 | 96.2 | 50 | 31.5~41.5 | HY08-M6 |
Remarks
- Direct Clamping
- Tool shank diameter tolerance h6 (h6 Tooling Diameter Tolerance)
- If you need to match the central outlet pipe, please refer toSpecification Table
- If you need a water outlet knife handle, please refer toSelection instructions
Precision tool holder series products
Deep hole machining・3μm high precision・Reduce tool wear
Shrink Fit Chuck
Shrink Fit Chuck
Quick tool change within 10 seconds・3μm high precision
Hydraulic Chuck
Hydraulic Chuck
Heavy cutting・5μm high precision・Super clamping torque
HER collet Chuck
Her Collet Chuck
