SK-CR
CR Standard Shrink Tool Holder-SK
Deflection runout≦0.003mm (4 times length)
After a special heat treatment process, the best accuracy and life can be maintained
The tool is clamped 360° all around, the rigidity can be greatly improved
Super clamping force, can correspond to rough and fine machining
Full range of dynamic balance
The shrink machine is available in high-end/economical styles
動平衡 Balancing
SK40 Max.25,000 RPM Or U<= 1gmm
SK50 Max.20,000 RPM Or U<= 1gmm
SK40 Max.25,000 RPM Or U<= 1gmm
SK50 Max.20,000 RPM Or U<= 1gmm
Dimensions
Comparison of size indication and detailed specifications
| Order No. Order number | FIG | ∅d | ∅d1 | ∅d2 | ∅d3 | L | L1 | L2 | Tool Clamping Depth L3 Tool clamping depth | L4 | Screw Adjustment screw |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SK40 CR04-080 | 1 | 4 | 16 | 23 | 80 | 60.9 | 40.7 | min18 | |||
| SK40 CR06-080 | 1 | 6 | 21 | 27 | 80 | 60.9 | 34.3 | 21.5~31.5 | HY06-M5 | ||
| SK40 CR06-130 | 2 | 6 | 21 | 27 | 31.9 | 130 | 110.9 | 38.1 | 21.5~31.5 | 108.1 | HY08-M6 |
| SK40 CR08-080 | 1 | 8 | 21 | 27 | 80 | 60.9 | 34.3 | 25.5~35.5 | HY08-M6 | ||
| SK40 CR08-130 | 2 | 8 | 21 | 27 | 31.9 | 130 | 110.9 | 38.1 | 25.5~35.5 | 108.1 | HY08-M6 |
| SK40 CR10-080 | 1 | 10 | 24 | 32 | 80 | 60.9 | 47 | 31.5~41.5 | HY08-M6 | ||
| SK40 CR10-130 | 2 | 10 | 24 | 32 | 31.9 | 130 | 110.9 | 50.8 | 31.5~41.5 | 108.1 | HY08-M6 |
| SK40 CR10-160 | 2 | 10 | 24 | 32 | 35.1 | 160 | 140.9 | 50.8 | 31.5~41.5 | 138.1 | HY08-M6 |
| SK40 CR12-080 | 1 | 12 | 24 | 32 | 80 | 60.9 | 47 | 36.5~46.5 | HY14-M8 | ||
| SK40 CR12-130 | 2 | 12 | 24 | 32 | 31.9 | 130 | 110.9 | 50.8 | 36.5~46.5 | 108.1 | HY14-M8 |
| SK40 CR12-160 | 2 | 12 | 24 | 32 | 35.1 | 160 | 140.9 | 50.8 | 36.5~46.5 | 138.1 | HY14-M8 |
| Order No. Order number | FIG | ∅d | ∅d1 | ∅d2 | ∅d3 | L | L1 | L2 | Tool Clamping Depth L3 Tool clamping depth | L4 | Screw Adjustment screw |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SK50 CR06-080 | 1 | 6 | 21 | 27 | 80 | 60.9 | 34.3 | 21.5~31.5 | HY06-M5 | ||
| SK50 CR06-130 | 2 | 6 | 21 | 27 | 31.4 | 130 | 110.9 | 38.1 | 21.5~31.5 | 103.3 | HY06-M5 |
| SK50 CR06-160 | 2 | 6 | 21 | 27 | 34.4 | 160 | 140.9 | 38.1 | 21.5~31.5 | 131.4 | HY06-M5 |
| SK50 CR08-080 | 1 | 8 | 21 | 27 | 80 | 60.9 | 34.3 | 25.5~35.5 | HY08-M6 | ||
| SK50 CR08-130 | 2 | 8 | 21 | 27 | 31.4 | 130 | 110.9 | 38.1 | 25.5~35.5 | 103.3 | HY08-M6 |
| SK50 CR08-160 | 2 | 8 | 21 | 27 | 34.4 | 160 | 140.9 | 38.1 | 25.5~35.5 | 131.4 | HY08-M6 |
| SK50 CR10-080 | 1 | 10 | 24 | 32 | 80 | 60.9 | 47 | 31.5~41.5 | HY08-M6 | ||
| SK50 CR10-130 | 2 | 10 | 24 | 32 | 31.4 | 130 | 110.9 | 50.8 | 31.5~41.5 | 103.3 | HY08-M6 |
| SK50 CR10-160 | 2 | 10 | 24 | 32 | 34.4 | 160 | 140.9 | 50.8 | 31.5~41.5 | 131.4 | HY08-M6 |
| SK50 CR12-080 | 1 | 12 | 24 | 32 | 80 | 60.9 | 47 | 36.5~46.5 | HY14-M8 | ||
| SK50 CR12-130 | 2 | 12 | 24 | 32 | 31.4 | 130 | 110.9 | 50.8 | 36.5~46.5 | 103.3 | HY14-M8 |
| SK50 CR12-160 | 2 | 12 | 24 | 32 | 34.4 | 160 | 140.9 | 50.8 | 36.5~46.5 | 131.4 | HY14-M8 |
Remarks
- Tool shank diameter tolerance h6 (h6 Tooling Diameter Tolerance)
- If you need a water outlet knife handle, please refer toSelection instructions
Precision tool holder series products
Deep hole machining・3μm high precision・Reduce tool wear
Shrink Fit Chuck
Shrink Fit Chuck
Quick tool change within 10 seconds・3μm high precision
Hydraulic Chuck
Hydraulic Chuck
Heavy cutting・5μm high precision・Super clamping torque
HER collet Chuck
Her Collet Chuck
