ISO-HER
HER collet tool holder-ISO
Deflection runout≦0.005mm (4 times length)
The full-circle nut can reduce wind resistance, improve stability and correspond to the center water
Collet collocation standard ER system, high versatility
Full range of bearing wrenches
Full range of dynamic balance
動平衡 Balancing
Max.30,000 RPM Or U<= 1gmm
Dimensions
Comparison of size indication and detailed specifications
| Order No. Order No. | FIG | Range ∅d clamping range | ∅d1 | L | L1 | Pull Stud | Nut | Collet | Wrench Wrench A | Wrench Wrench B |
|---|---|---|---|---|---|---|---|---|---|---|
| ISO20 HER16-035 | 1 | 1.0~10.0 | 30 | 35 | 26 | PI20T-1 | CAP-HER16 | ER16-HP | PHS-20-RO300 | PHS-ISO20 |
| Order No. Order No. | FIG | Range ∅d clamping range | ∅d1 | L | L1 | Pull Stud | Nut | Collet | Wrench Wrench A | Wrench Wrench B |
|---|---|---|---|---|---|---|---|---|---|---|
| ISO25 HER16-035 | 1 | 1.0~10.0 | 30 | 35 | 26.2 | PI25T-1 | CAP-HER16 | ER16-HP | PHS-HER16-RO30 | PHS-ISO25 |
| Order No. Order No. | FIG | Range ∅d clamping range | ∅d1 | L | L1 | Pull Stud | Nut | Collet | Wrench Wrench A | Wrench Wrench B |
|---|---|---|---|---|---|---|---|---|---|---|
| ISO30 HER16-060 | 2 | 1.0~10.0 | 30 | 60 | 40.9 | PI30T-1 | CAP-HER16 | ER16-HP | PHS-20-RO300 | |
| ISO30 HER20-060 | 2 | 1.0~13.0 | 32 | 60 | 40.9 | PI30T-1 | CAP-HER20 | ER20-HP | PHS-20-RO320 | |
| ISO30 HER25-060 | 2 | 1.0~16.0 | 40 | 60 | 40.9 | PI30T-1 | CAP-HER25 | ER25-HP | PHS-20-RO400 |
Remarks
- Requires 3µ HP Collet With 3µ HP Grade Collet
- If you need a water outlet knife handle, please refer toSelection instructions
- Collet clamping is a one-to-one integer value
Precision tool holder series products
Deep hole machining・3μm high precision・Reduce tool wear
Shrink Fit Chuck
Shrink Fit Chuck
Quick tool change within 10 seconds・3μm high precision
Hydraulic Chuck
Hydraulic Chuck
Heavy cutting・5μm high precision・Super clamping torque
HER collet Chuck
Her Collet Chuck
