HSK-E-HY

HY Hydraulic Tool Holder-HSK-E

Deflection runout≦0.003mm (4 times length)
With shock absorption function, increase the surface roughness of the workpiece and extend the life of the tool
Super easy clamping operation design
Good repeatability
Can correspond to the center water
Full range of dynamic balance

動平衡 Balancing

Max.30,000 RPM Or U<= 1gmm
Max.30,000 RPM Or U<= 1gmm

Dimensions

Comparison of size indication and detailed specifications

Order No.
Order number
FIG∅d∅d1∅d2LL1L2Tool Clamping
Depth L3
Tool clamping depth
Screw
Adjustment screw
Collet
Collet
HSK40E HY06-070162633.8705024.531~36HY06-M5
HSK40E HY08-070182833.8705025.531~36HY08-M6
HSK40E HY10-0801103033.8806035.535~40HY08-M6
HSK40E HY12-0801123233.880604039~45HY08-M6HY12-C
Order No.
Order number
FIG∅d∅d1∅d2LL1L2Tool Clamping
Depth L3
Tool clamping depth
Screw
Adjustment screw
Collet
Collet
HSK50E HY06-080162640805424.531~36HY06-M5
HSK50E HY08-080182840805424.531~36HY08-M6
HSK50E HY10-0801103040805435.535~40HY08-M6
HSK50E HY12-090112324090644039~45HY08-M6HY12-C
HSK50E HY14-090114344090644039~45HY14-M8
HSK50E HY16-090116384090644042~48HY14-M8
HSK50E HY18-090218344290644042~48HY18-M12
HSK50E HY20-090220374290641144~50HY18-M12HY12-C

Remarks

  • Direct Clamping
  • Tool shank diameter tolerance h6 (h6 Tooling Diameter Tolerance)
  • If you need to match the central outlet pipe, please refer toSpecification Table
  • If you need a water outlet knife handle, please refer toSelection instructions

Precision tool holder series products

Deep hole machining・3μm high precision・Reduce tool wear

Shrink Fit Chuck

Shrink Fit Chuck

Quick tool change within 10 seconds・3μm high precision

Hydraulic Chuck

Hydraulic Chuck

Heavy cutting・5μm high precision・Super clamping torque

HER collet Chuck

Her Collet Chuck