HSK-E-CR

CR Standard Shrink Tool Holder-HSK-E

Deflection runout≦0.003mm (4 times length)
Slender design, can overcome interference processing, rough and fine processing can be corresponded
After a special heat treatment process, the best accuracy and life can be maintained
The tool is clamped 360° all around, the rigidity can be greatly improved
Full range of dynamic balance
The shrink machine is available in high-end/economical styles

動平衡 Balancing

Max.30,000 RPM Or U<= 1gmm

Specification download Performance characteristics

Dimensions

Comparison of size indication and detailed specifications

Order No. Order number	∅d	∅d1	∅d2	L	L1	L2	Tool Clamping Depth L4 Tool clamping depth	Screw Adjustment screw
HSK32E CR04-060	4	15	20	60	40	31.8	min18
HSK32E CR06-070	6	21	26	70	50	31.8	215.5~315	HY06-M5
HSK32E CR08-070	8	21	26	70	50	31.8	25.5~35.5	HY08-M6
HSK32E CR10-080	10	24	26	80	60	44.7	31.5~41.5	HY08-M6

Order No. Order number	∅d	∅d1	∅d2	L	L1	L2	Tool Clamping Depth L4 Tool clamping depth	Screw Adjustment screw
HSK40E CR04-060	4	15	20	60	40	31.8	min18
HSK40E CR08-080	6	21	27	80	60	34.3	21.5~31.5	HY06-M5
HSK40E CR08-080	8	21	27	80	60	34.3	25.5~35.5	HY08-M6
HSK40E CR10-080	10	24	32	80	60	47	31.5~41.5	HY08-M6

Order No. Order number	∅d	∅d1	∅d2	L	L1	L2	Tool Clamping Depth L4 Tool clamping depth	Screw Adjustment screw
HSK50E CR04-060	4	16	21.2	60	34		min18
HSK50E CR04-080	4	16	23	80	54	34.3	min18
HSK50E CR06-080	6	21	27	80	54	34.3	21.5~31.5	HY06-M5
HSK50E CR08-080	8	21	27	80	54	34.3	25.5~35.5	HY08-M6
HSK50E CR10-085	10	24	32	85	59	47	31.5~41.5	HY08-M6
HSK50E CR12-090	12	24	32	90	64	47	36.5~46.5	HY14-M8
HSK50E CR16-095	16	27	34	95	69	40.7	39.5~49.5	HY18-M12

Remarks

Tool shank diameter tolerance h6 (h6 Tooling Diameter Tolerance)
If you need to match the central outlet pipe, please refer toSpecification Table
If you need a water outlet knife handle, please refer toSelection instructions