Bush
bushing
TYPE A capless fixed bushing
The bushing is fixed without the cap edge and directly pressed into the bushing bearing plate to guide the drill bit or reamer to drill and ream.
TYPE B fixed bushing with cap
The bushing is fixed with a cap edge, and it is directly pressed into the bushing bearing plate to guide the drill bit or reamer to drill and ream.
TYPE D Right-hand rotation notch bushing
Through the G fixed bushing, right-hand inserting can easily exchange bushings of different sizes. After the screw is fixed, the drill and reamer can be guided to drill and ream.
TYPE E Left Swivel Slotted Bushing
Through the G fixed bushing, it can be easily exchanged for different sizes of bushings by inserting left-handedly. After the screw is fixed, the drill and reamer can be guided to drill and ream.
TYPE F Slotted Insert Bushing
Through the G fixed bushing, after inserting, the screw can be locked to guide the drill and reamer to drill and ream.
TYPE G guide bushing
After pressing into the bearing plate of the bushing, insert the C/D/E/F insert bushing for exchange guide.
TYPE T&R stop screw ring/stop ring
The stop screw is used to prevent rotation of the C/D/E/F insert bushing. It is recommended to use the stop ring when the load is too heavy.
Full range of high-speed built-in spindle
Want to view all PARFAITE's high-speed built-in spindle products? PARFAITE provides all kinds of spindles to realize the full range of ultra-high precision machining dreams.
